Welcome, visitor! [ Register | LoginRSS Feed

China Injection Mould Manufacturer

  • City: asasas
  • State: Alabama
  • Listed: July 23, 2019 4.00
  • Expires: 63 days, 2 hours

About Your Need

Specification of 18Cavity Hot Runner Preform Mould
1,Specification of mould:
1.1 capacity: 3.5shots/ minute;
2. Material
2.1 Frame of mould: good quality imported 50# steel with Chrome on the face; (HRC: 28R).
2.2 Core and cavity: 2316 Stainless steel (HRC: 44-46R: German).
2.3 Screw: 2316 Stainless steel (HRC: 44-46R: German).
2.4 Hot runner : P20 steel (HRC: 28R, China).
2.5 Valve: SKD61 and SKH51steel (HRC: 59-61R, China).
2.6 The other materials are adopted international standard parts.
3. Features
3.1 Screw is made of imported nit-riding steel as the International Standard with high hardiness and long service life.
3.2 Hot runner (German HASCO), adopt best cooling system.
3.3 It can shorten the processing days, raise efficiency, improve the quality and appearance of the products by adopts this hot runner.
3.4. Usually, Multi-cavity pet preform mould does use the hot runner system rather than cold runner system, so the design of hot runner system plays an important role in mould quality guarantee. Based on foreign advanced techniques and combined with domestic clients demand, we adopt the valve gated design, in which each cavity has its own heating zone and temperature is measured by independent thermocouple. (Advantages: Easily avoid some problems such as white or draw bench on bottom). Here, Mould is produced automatically to reduce labor force.
3.5 Main mould components (die core, die cavity, screw neck) are made by injection process, and the material of which originates from Sweden high-quality mould steel (HRC 45). In this way, it is no doubt that the mould can be used for 2 million shots without any maintenance, meanwhile, the wall thickness between max. Part and min. Part is not more than 0.10mm; Turning center processes make sure that every parts can match well; Proper distribution of cooling water way improve productivity effect and molding cycle only takes 15 seconds( need proper water chiller, bottle design and injection machine)
4. Electric Heating Components
4.1 German Hotset heating components.
4.2 German intelligent temperature controller (PID continuous power controlling).
4.3 Offering temperature controller and voltage controller according to customers' requirement.
5. After-Sales Service
Technologists professional in after-sales line and excellent credit assures stable operation of the machines.
6. Pictures of mould:
7. Package of moulds:
7. Frequently Asked Questions:
Q: What’s the output of 18cavity preform mould?
A: 3780pcs/h.
Q: When can I get the price?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or inform us by email, so that we will regard your inquiry in priority.
Q: Where is your loading port?
A: Ningbo/Shanghai, Chinaor else port as for your request.
Q: What are your company’s main products?
A: The main products of our company are Automatic & semi-automatic blow moulding machine, PET preform, plastic injection machine, preform moulds, bottle moulds, commodity moulds and correlative products.
8. About Us:
Preform moulds manufacturer:
4cavity hot runner preform mould
8cavity hot runner preform mould
12cavity hot runner preform mould
16cavity hot runner preform mould
Taizhou Doria Plastic Equipment Co., Ltd. is located the town of plastic products and mould in China, which is one manufacturer owns special production teams, advanced production equipments and rich production experience.
Based on “Quality is first; Honor for the honest”, we always continue development and innovation to witness the maturity of industrial chain of products and improve the quality of products continually. Untiring effort makes the products, especially for 5gallon blow moulding machine, 5gallon PET preform and commodity moulds are widely accepted by our customers.
Welcome everyone to visit us; we hope we will have good chance to cooperate!
9. Location:
No.362 Lingxiage Village, Xicheng Street, Huangyan, Taizhou, Zhejiang, China
10. Contact Us:
Email: sales@chinadoria.cn
Tel: +86 15267630381
+86 15867055081China Injection Mould Manufacturer
website:http://www.chinadoriamachine.com/injection-mould/

Description

Specification of 18Cavity Hot Runner Preform Mould
1,Specification of mould:
1.1 capacity: 3.5shots/ minute;
2. Material
2.1 Frame of mould: good quality imported 50# steel with Chrome on the face; (HRC: 28R).
2.2 Core and cavity: 2316 Stainless steel (HRC: 44-46R: German).
2.3 Screw: 2316 Stainless steel (HRC: 44-46R: German).
2.4 Hot runner : P20 steel (HRC: 28R, China).
2.5 Valve: SKD61 and SKH51steel (HRC: 59-61R, China).
2.6 The other materials are adopted international standard parts.
3. Features
3.1 Screw is made of imported nit-riding steel as the International Standard with high hardiness and long service life.
3.2 Hot runner (German HASCO), adopt best cooling system.
3.3 It can shorten the processing days, raise efficiency, improve the quality and appearance of the products by adopts this hot runner.
3.4. Usually, Multi-cavity pet preform mould does use the hot runner system rather than cold runner system, so the design of hot runner system plays an important role in mould quality guarantee. Based on foreign advanced techniques and combined with domestic clients demand, we adopt the valve gated design, in which each cavity has its own heating zone and temperature is measured by independent thermocouple. (Advantages: Easily avoid some problems such as white or draw bench on bottom). Here, Mould is produced automatically to reduce labor force.
3.5 Main mould components (die core, die cavity, screw neck) are made by injection process, and the material of which originates from Sweden high-quality mould steel (HRC 45). In this way, it is no doubt that the mould can be used for 2 million shots without any maintenance, meanwhile, the wall thickness between max. Part and min. Part is not more than 0.10mm; Turning center processes make sure that every parts can match well; Proper distribution of cooling water way improve productivity effect and molding cycle only takes 15 seconds( need proper water chiller, bottle design and injection machine)
4. Electric Heating Components
4.1 German Hotset heating components.
4.2 German intelligent temperature controller (PID continuous power controlling).
4.3 Offering temperature controller and voltage controller according to customers’ requirement.
5. After-Sales Service
Technologists professional in after-sales line and excellent credit assures stable operation of the machines.
6. Pictures of mould:
7. Package of moulds:
7. Frequently Asked Questions:
Q: What’s the output of 18cavity preform mould?
A: 3780pcs/h.
Q: When can I get the price?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or inform us by email, so that we will regard your inquiry in priority.
Q: Where is your loading port?
A: Ningbo/Shanghai, Chinaor else port as for your request.
Q: What are your company’s main products?
A: The main products of our company are Automatic & semi-automatic blow moulding machine, PET preform, plastic injection machine, preform moulds, bottle moulds, commodity moulds and correlative products.
8. About Us:
Preform moulds manufacturer:
4cavity hot runner preform mould
8cavity hot runner preform mould
12cavity hot runner preform mould
16cavity hot runner preform mould
Taizhou Doria Plastic Equipment Co., Ltd. is located the town of plastic products and mould in China, which is one manufacturer owns special production teams, advanced production equipments and rich production experience.
Based on “Quality is first; Honor for the honest”, we always continue development and innovation to witness the maturity of industrial chain of products and improve the quality of products continually. Untiring effort makes the products, especially for 5gallon blow moulding machine, 5gallon PET preform and commodity moulds are widely accepted by our customers.
Welcome everyone to visit us; we hope we will have good chance to cooperate!
9. Location:
No.362 Lingxiage Village, Xicheng Street, Huangyan, Taizhou, Zhejiang, China
10. Contact Us:
Email: sales@chinadoria.cn
Tel: +86 15267630381
+86 15867055081China Injection Mould Manufacturer
website:http://www.chinadoriamachine.com/injection-mould/

48 total views, 1 today

  

Listing ID: 7215d36ae58b32cc

Report problem

Processing your request, Please wait....

منتجات honowang تنضج في الداخل والخارج

منتجات honowang تنضج في الداخل والخارج

232 total views, 2 today

printer-spare-parts-for-kyocera-toner38368212286

ООО «asta Шэньчжэнь»

ООО «asta Шэньчжэнь» была основана в 2004 году. В 2009 году появился бренд «asta», который фокусируется на разработке и продаже высококачественных совместимых тонер-картриджей и бункеров […]

222 total views, 3 today

Leave a Reply

To inquire about this ad listing, complete the form below to send a message to the ad poster.